Products

Hmoe > Products

JS1105 Medical Gavalnometer Scanner

Release time:2015-12-24 15:49  

JS1105 is the latest R&D of high performance medical beauty galvanometer scanner. The scanner hand piece designing was adopted the unique vertically into the light structure. It has the characteristic of small volume, light weight, high speed, easy operate etc. A full range of security protection function, custom software development which makes the stability and reliability of the scanner reached the world leading level. It also has independent intellectual property rights.

 

Motor Specification

Working Temperature: 0℃-45℃

Linearity: 99.9%

Setting Time: ≤0.35ms

Scale Drift: <40PPM/℃

Zero Drift: <15μRad. /℃

Long-term Drift Over 8 Hours: <0.5mRad

RMS Current: 2.0A

Peak Current: 10A (Max)

Maximum Scan Angle: ±15°

Storage Temperature: -10 to +60℃

Resolution: 12μrad

Repeatability: 8μrad

Input Aperture: 5.0-7.0mm

Beam Displacement: 10.7mm

Weight: 13g

Frequency: ≤1000Hz

 

Servo Drive Board Specification

Input Voltage: ±15VDC

Interface Signals Analog: ±5V

Fault Signal Output (TTL level): H is for galvanometer working normally

                  L for galvanometer failure

Position Digital Input Resistance: 200KΩ±1%

Position Signal Input Resistance: 1KΩ±1%

Position Signal Input Scale Factor: 0.33V/°

Position Signal Output Scale Factor: 0.33V/°

Working Temperature: 0-45℃

Dimension (LxWxH): 75x58x33mm


The Characteristics of JS1105 Scanner:

1. The scanner hand piece designing was adopted the unique vertically into the light structure, only weights 150g, the operation is flexible and convenient.

2. It was adopted the F-Theta lens instead of focusing lens, the uniformity of scanning point is very fine in the marking plane, the minimum beam diameter can reach 0.01mm.

3. Adopted the world’s smallest scanning motors, the photoelectric sensors is imported from America, only weights 13g, the marking speed is two times faster than common scanners, the setting time reaches 0.35ms.

4. The Driving system adopted the control method of Germany glavo scanners, two motors are centralized controlled by only one drive board, the performance is stable, reliable and high accuracy. All precision electronic components are imported from aboard.

5. The control board are designed according to the industrial computer motherboard standard, comprehensive configuration isolation measures, with good electromagnetic compatibility, stronger anti-interference ability, can effectively prevent the motherboard damage caused by external input error signals or power supply.

6. With powerful software function, convenient parameter settings, a variety of scanning shapes and scanning mode for options, the scanning shapes can be two-way adjusted.

7. This model has the self-inspection and protection signal output function. It will output the protection signal within 0.1ms when the scanner working abnormal, to shut down the laser power supply thereby effectively to prevent medicals accidents.



<<Back